Configurations2023-05-02T10:32:27+00:00

CONFIGURATIONS

GEC ANDERSON® WORKTOP CONFIGURATIONS

Stainless steel worktops from GEC Anderson® are made-to-measure, to your precise size, specification and requirements. They provide unrivalled design freedom and feature hygienic, continuous, worksurfaces with no crevices, no joints and no dirt-traps.

  • Irregular forms can be supplied in one piece – including L-shapes, U-shapes and curves.
  • Sink bowls are arranged and configured to suit individual requirements and are integral with the worktop.
  • Comprehensive range of integrated edge profiles that are adaptable to meet your specific requirements.
  • Cut-outs and tap holes provided as required.
  • Maximum length: 6500mm with maximum return to L-shapes: 2300mm.

Please select from the buttons below to see some suggested configurations or please contact us to discuss specific requirements.

RECTANGLE

GEC Anderson specialise in single-piece and over-sized stainless steel worktops.

  • Lengths of up to 7000mm are available
  • Corners can be at any angle
  • Up to 650mm width is considered standard but larger sizes are available eg.1200mm

L-SHAPES

  • Available in one piece to give a clean and uncluttered appearance
  • No joins
  • No crevices
  • No dirt traps
  • The maximum external dimension to the return side is 2300mm

IRREGULAR

  • Irregular forms, such as curves, splays and angles make it possible to design worktops that fit exactly into the space available – and with an appearance that matches your design.
    • GEC Anderson® edge (8) is available for curved surfaces
    • Simply provide us with the sizes and angles and we will make it for you!

BUTT JOINS

Worktop joins are minimised but, sometimes, sections are unavoidable (eg. due to access restrictions or manufacturing limitations).

The simple Butt Join is often the best solution. Alternatively, the GEC Anderson® Clamp Join provides a mechanical connection with minimal visual impact.

The Butt Join can be used with various edge details, that can be chosen to minimise the visual impact of the join.

Please speak to our technical department for guidance and advice.

CLAMP JOINS

Worktop joins are minimised but, sometimes, sections are unavoidable (eg. due to access restrictions or manufacturing limitations).

The simple Butt Join is often the best solution. Alternatively, the GEC Anderson® Clamp Join provides a mechanical connection with minimal visual impact.

The GEC Anderson® Clamp Join provides a mechanical connection with minimal visual impact. The sections are bolted together on site and only a slight line is evident on the work surface. Clear silicone is applied within the join to provide full water resistance.

Please speak to our technical department for guidance and advice.

Cutouts within GEC Anderson® stainless steel worktops are made to your precise size, specification and requirements.

  • Appliance Cutouts (eg. Hobs) – Any size or postion. For inset or flush-fit fixing
  • Tapholes – Any combination or size
  • Corners – Rounded or Angled
  • Bin Chutes – For convenient disposal of small items of waste

Case Studies